Beckett AF Manual de Instruções Página 10

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 24
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 9
10
Figure 4. Check/Adjust ‘Z’ Dimension for ‘F’ Heads
Section: Mount Burner on Appliance
Make all adjustments exactly as outlined in the
following information.
Incorrect Adjustments could cause combustion
problems, carbon deposition from ame
impingement, heavy smoke generation and re
hazard.
Adjust the ‘Z’ dimension
to the required
speci cation.
Check/Adjust ‘Z’ Dimension - ‘F’ heads
The important ‘Z’ dimension is the distance from the face
of the nozzle to the at face of the head (or heat shield, if
applicable). This distance for F heads is 1-” (1-” if the
air tube has a heat shield). The “Z” dimension is factory
set for burners shipped with the air tube installed. Even
if factory set, verify that the “Z” dimension has not been
changed.
Use the following procedure to adjust the “Z” dimension, if
it is not correct:
1.
2.
Turn off power to the burner.
Disconnect the oil connector tube from the nozzle line
See above gure. Loosen the splined nut from the
nozzle line. Loosen the hex head screw securing the
escutcheon plate to the burner housing.
Place the end of a ruler at the face of the nozzle and,
using a straight edge across the head, measure the
distance to the face of the head. A Beckett T501 gauge
may also be used.
Slide the nozzle line forward or back until this
dimension for F heads is 1-” (1-” to the face of the
heat shield, if applicable).
Tighten the hex head screw to secure the escutcheon
plate to the burner chassis. Then tighten the splined
nut and attach the oil connector tube.
Recheck the “Z” dimension periodically when servicing to
ensure the escutcheon plate has not been moved. You
will need to reset the “Z” dimension if you replace the air
tube or nozzle line assembly. The Beckett Z gauge (part
number Z-2000) is available to permit checking the F
head “Z” dimension without removing the burner from the
appliance.
3.
1-3/8”
1-1/8”
Burner Dimensions
For usable length A (inches)
Dimension (inches)
F Head L1 Head L2 Head V1 Head
H
(nozzle to head), +1/32
N/A 1/4 7/32 1/4
L
(Total tube length)
A+1/2 A+1/2 A+1/2 A+1/2
R
(electrode length), + 1/4
A+2-1/4 A+1-1/8 A+1-1/8 A+1-1/8
S
(adapter to static plate), + 1/16
(Note 1) 1-3/8 1-3/8 1-3/8
Q
(nozzle line length),
A+ 15/16 A+ 3/16 A+ 3/16 A+ 3/16
Z
(F head-no heat shield)
(F head-with heat shield)
(L1 head w/straight shroud)
(L1/L2/V1 head w/conic shroud)
1-1/8
1-3/8
N/A
N/A
N/A
N/A
1-3/8
1-3/4
N/A
N/A
N/A
1-3/4
N/A
N/A
N/A
1-3/4
Note 1: 1-3/8 for dimension A less than 4”; 1-5/8 for dimension A from 4” through 4-1/2 “,
2-13/32 for dimension A greater than 4-1/2”.
Vista de página 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comentários a estes Manuais

Sem comentários

AEG Santo 1742E-m3D(R) manuály

Uživatelské manuály a uživatelské příručky pro ne AEG Santo 1742E-m3D(R).
Poskytujeme 1 manuály pdf AEG Santo 1742E-m3D(R) ke stažení zdarma podle typů dokumentů: Uživatelský manuál






Další produkty a příručky pro ne AEG

Modely Typ Dokumentu
ARCTIS No-frost (frost free) Uživatelský manuál      AEG ARCTIS No-frost (frost free) User manual [de] [es] [fr] [it] [nl] [pl] , 64 stránky
SCT71900S0 Uživatelský manuál SCT71900S0 SV KYL-FRYS BRUKSANVISNING, 28 stránky
HES 4890 DVB-T/DVD Uživatelský manuál   Braunschweiger, 32 stránky
66050i Technické informace   AEG 66050i Technical information, 60 stránky
818 20 85 Provozní pokyny   AEG 818 20 85 Operating instructions, 48 stránky
SKZ71800F0 Uživatelský manuál     SKZ71800F0 CSNávod k použití 2 NOBruksanvisning - E, 92 stránky
Integrating Freezer Provozní pokyny   AEG Integrating Freezer Operating instructions, 13 stránky
C 8 16 41 I Uživatelský manuál   Catalogue, 48 stránky
SANTO 75448 KGR Uživatelský manuál   AEG SANTO 75448 KGR User manual, 24 stránky
S75358KG38 Uživatelský manuál     AEG S75358KG38 User manual, 64 stránky
SKD71800F0 Uživatelský manuál   AEG SKD71800F0 User manual, 16 stránky
ARE I2 Instalační příručka   AEG ARE I2 Installation guide, 33 stránky
SANTO Provozní pokyny   AEG SANTO Operating instructions, 44 stránky
SANTO 72358 KA Provozní pokyny   AEG SANTO 72358 KA Operating instructions [en] , 32 stránky
S83430CTX2 Uživatelský manuál       AEG S83430CTX2 User manual, 72 stránky
Automatic Refrigerator Příručka pro použití a péči   AEG Automatic Refrigerator Use & care guide, 15 stránky
Oko arctis 2682 GT Uživatelský manuál   Braunschweiger, 24 stránky
DL 80.2 M Uživatelský manuál   AEG DL 80.2 M Product data, 2 stránky
ARCTIS 1310GS Uživatelský manuál   ARCTIS 70258 GS, 21 stránky
AGS58200F0 Uživatelský manuál      AEG AGS58200F0 User manual, 72 stránky